Date posted:
MCI received a 40 year old Bandmill setting system which was intermittently failing. We took the elderly system apart and, after some fault finding, we replaced the failing components. We then built a test rig to ensure the system was stable. The customer was delighted because not many electrical engineers…
Date posted:
MCI received an electric car charger from a customer who said that it had stopped working. Once the MCI engineer had looked inside the unit, it became apparent that the internal terminals had slackened and started to overheat and burn. We replaced the connectors to the original standard and the…
Date posted:
MCI received this industrial catering machine. The only information that we got from the customer was that it wasn’t working. When our engineers took the machine apart, they discovered that years of grease and grime had seeped into the machine, contaminating the circuit boards and components. After a good clean,…
Date posted:
MCI sourced, supplied and installed this new DC Drive unit as well as set it up for optimum performance. These units are very common in the motor control industry. If you are looking for motor control solutions, give MCI a call on 01324 611371.
Date posted:
MCI was asked to replace old battery packs from a client’s weighing scales. We were also asked to improve the connection system and robustness of the those batteries. MCI’s engineers came up with a design to increase the lifespan of the battery packs whilst also making them safer to handle.…
Date posted:
MCI’s engineers were called out to a large water cooled inverter drive, which had a serious fault. The fault had stopped a high production machine from working. The inverter was over £20,000 for a replacement and would have taken several weeks to get a new one. MCI’s engineer partially stripped…
Date posted:
A DC Motor control board that had gone faulty and had tripped out the main supply. The fault was traced back to the Drive unit by one of MCI’s engineers. We sourced a replacement through our distributions department and installed it. As the new unit was factory set, our engineer…
Date posted:
MCI has a service repairing and refurbishing broken commercial oven control boards. These ovens are commonly used in high street bakeries. Services in Addition to Repairing Oven Control Boards MCI has over a decade of experience in dealing with bakery machinery. From industrial ovens to blast freezers, we have fixed…
Date posted:
We received a boiler control from a school. The boiler was obsolete and the school didn’t want to buy a whole new machine. We replaced the transformer and tested it, getting the boiler back up and working in no time. There isn’t much we can’t fix at MCI. Give us…
Date posted:
Repair MCI was asked to repair a control panel digitizer that had suffered quite an impact. The digitizer was replaced and the unit checked to make sure it was fully operational. It wasn’t long before the panel was back in service. MCI not only repairs control panels, but also can…
