Date posted:
MCI were called to a well known bakery, to investigate a problem with a Hypermill ultrasonic cutting machine. The fault was in one of the two generators which provide ultrasonic vibrations to the cutting blades. The generator was transferred to our workshop, where we found a faulty relay and a…
Date posted:
MCI received a call from a new customer who manufactures portable cabins. Their long serving wood pressure treatment machine had a failed Mitsubishi PLC. Unfortunately, the customer did not have a backup of the PLC program, so it had been very difficult to get the machine running again without MCI’s…
Date posted:
MCI received a meat slicer with a fault from a food manufacturer. Our engineers set to work to find out what was wrong and discovered that the inverter drive had failed. We replaced the drive, and the meat slicer was back in action. Another happy customer! If you are having…
Date posted:
MCI received a Siemens Micromaster communications module from a pharmaceutical distributor. After our engineers had a look, they found that the capacitors had failed. After removing and replacing them, the module was back in action. Another happy customer! MCI is proud to work for many companies across the UK and…
Date posted:
MCI was called out to look at a customer’s pastry making machine. Production had halted – no sausage rolls or steak bakes. Our engineer found the cause of the error and quickly went to work and repaired the machine in good time. The pastry machine was back producing savoury pastries…
Date posted:
MCI received a request from a fire safety company to update an existing control box. As you can see from the pictures, quite an improvement! Another happy customer. If you have any machinery or equipment that needs an electrical or electronic upgrade, call MCI on 01324 611371, to see how…
Date posted:
The new client to MCI sent in a faulty industrial mixer. MCI’s repair team traced the fault to a damaged probe unit built into the control panel. MCI repaired, tested, and returned the unit back to a happy customer. If you are having control unit problems, just give us a…
Date posted:
The customer asked us to have a look at a Ferrocontrol power unit which they brought into the workshop for MCI to repair. Here you can see one of MCI’s engineers checking the control panels in the machine at the customer’s factory. If you have any issues with your control…
Date posted:
MCI got a servo motor in for repair. As you can see from the photos, it didn’t take much time to notice that some of the components had burnt out. Luckily, we had replacements in our workshop. The damaged components were quickly swapped. If you are having problems with your…