Date posted:
MCI received a heavy duty DC motor from a client which was badly damaged, as you can see from our photos. The armature had a large number of shorts due to a rub found on the commutator risers. All the commutator undercutting repairs were completed and all the shorts were…
Date posted:
MCI received two industrial circuit boards that had been damaged. As you can see from the pictures, we replaced the faulty components and cleaned up the boards. The repaired boards were then returned to the customer as good as new. If you need any industrial circuit board repairs, don’t hesitate…
Date posted:
MCI received a damaged energy monitor from an incoming switch room which had been damaged by a surge. We found the blown components, replaced them with new components from our stock then returned it to the client, all in a very short time frame. Unexpected events that damage and destroy…
Date posted:
MCI was sent a water control panel that been damaged by water ingress. Our distribution department sourced a new membrane from Italy and it was replaced and sent back to the customer within days. If you have any problems with your control panels, call MCI Electronics on 01324 611371 to…
Date posted:
MCI received a 40 year old Bandmill setting system which was intermittently failing. We took the elderly system apart and, after some fault finding, we replaced the failing components. We then built a test rig to ensure the system was stable. The customer was delighted because not many electrical engineers…
Date posted:
MCI received this industrial catering machine. The only information that we got from the customer was that it wasn’t working. When our engineers took the machine apart, they discovered that years of grease and grime had seeped into the machine, contaminating the circuit boards and components. After a good clean,…
Date posted:
MCI has a service repairing and refurbishing broken commercial oven control boards. These ovens are commonly used in high street bakeries. Services in Addition to Repairing Oven Control Boards MCI has over a decade of experience in dealing with bakery machinery. From industrial ovens to blast freezers, we have fixed…
Date posted:
MCI received a circuit board which was damaged because a joiner had put a nail through the power cable of an air conditioning unit. As you can see from the scorch marks, the board was in bad shape by the time it reached us. MCI removed the damaged component, cleaned…
Date posted:
MCI received a broken circuit board from a food manufacturer’s machine. The conveyor belt in an oven had stopped working and the circuit board was in quite a state! MCI tested and repaired the damaged parts. MCI Electronics has been working with food manufacturers for over a decade and we…
Date posted:
MCI recently refurbished motors for the rail industry. We made these old motors look and perform like new. We rewound them and gave them a new set of bearings. After a full test and a repaint, we’re done. Why throw away your old components when you can send them to…