Date posted:
MCI received a damaged energy monitor from an incoming switch room which had been damaged by a surge. We found the blown components, replaced them with new components from our stock then returned it to the client, all in a very short time frame. Unexpected events that damage and destroy…
Date posted:
MCI was sent a water control panel that been damaged by water ingress. Our distribution department sourced a new membrane from Italy and it was replaced and sent back to the customer within days. If you have any problems with your control panels, call MCI Electronics on 01324 611371 to…
Date posted:
MCI were called out to a breakdown on this stone cutting CNC. The cables were badly damaged due to wear and tear in the machine’s energy chain. As a result, the machine was completely out of action. As you can see from our video clip, the machine is now back…
Date posted:
MCI received a 40 year old Bandmill setting system which was intermittently failing. We took the elderly system apart and, after some fault finding, we replaced the failing components. We then built a test rig to ensure the system was stable. The customer was delighted because not many electrical engineers…
Date posted:
MCI received an electric car charger from a customer who said that it had stopped working. Once the MCI engineer had looked inside the unit, it became apparent that the internal terminals had slackened and started to overheat and burn. We replaced the connectors to the original standard and the…
Date posted:
MCI received this industrial catering machine. The only information that we got from the customer was that it wasn’t working. When our engineers took the machine apart, they discovered that years of grease and grime had seeped into the machine, contaminating the circuit boards and components. After a good clean,…
Date posted:
MCI was asked to replace old battery packs from a client’s weighing scales. We were also asked to improve the connection system and robustness of the those batteries. MCI’s engineers came up with a design to increase the lifespan of the battery packs whilst also making them safer to handle.…
Date posted:
MCI’s engineers were called out to a large water cooled inverter drive, which had a serious fault. The fault had stopped a high production machine from working. The inverter was over £20,000 for a replacement and would have taken several weeks to get a new one. MCI’s engineer partially stripped…
Date posted:
A DC Motor control board that had gone faulty and had tripped out the main supply. The fault was traced back to the Drive unit by one of MCI’s engineers. We sourced a replacement through our distributions department and installed it. As the new unit was factory set, our engineer…
Date posted:
MCI has a service repairing and refurbishing broken commercial oven control boards. These ovens are commonly used in high street bakeries. Services in Addition to Repairing Oven Control Boards MCI has over a decade of experience in dealing with bakery machinery. From industrial ovens to blast freezers, we have fixed…
