Date posted:
MCI was recently asked by Bannatyne Filtration, a company that we have a close working relationship with, to investigate some failing extraction units at a local hospital. After an initial investigation, it was found that some of the motors had failed due to age and the weather. We supplied and…
Date posted:
MCI received this machine control panel from a food manufacturer. Our engineers saw that faulty relays and bases were preventing the machine from running properly. The job was urgent due to production demand, so we turned the repair around in less than a week for the customer. As you can…
Date posted:
MCI received a machine drive from a hot melt glueing system for MDF boards. As you can see, the board was badly damaged. After a good clean up and replacement of damaged parts, the board is back to its old self. If you are having problems with your machine circuitry,…
Date posted:
MCI’s team received a desperate call from an injection moulding company. The company had been told the display and control system was beyond repair. They were not in a position to replace the machine and reached out to us for help. Our engineers carried out initial essential repairs and managed…
Date posted:
Have you ever played ‘spot the ball’? Well, MCI is asking you to ‘spot the blown channel’ in this IGBT! The IGBT came from our clients inverter drive (VSD) that was giving inconsistent performance. After testing and a very close inspection, our engineer noticed this tiny hole blown from the…
Date posted:
MCI received a call from a new client that was having problems with their production line that had an electrical fault. After doing some fault finding, our engineer saw that water ingress had caused a motor soft start to fail. Further investigation also revealed a damaged contactor. We sourced a…
Date posted:
MCI received two industrial circuit boards that had been damaged. As you can see from the pictures, we replaced the faulty components and cleaned up the boards. The repaired boards were then returned to the customer as good as new. If you need any industrial circuit board repairs, don’t hesitate…
Date posted:
MCI received a damaged energy monitor from an incoming switch room which had been damaged by a surge. We found the blown components, replaced them with new components from our stock then returned it to the client, all in a very short time frame. Unexpected events that damage and destroy…
Date posted:
MCI was sent a water control panel that been damaged by water ingress. Our distribution department sourced a new membrane from Italy and it was replaced and sent back to the customer within days. If you have any problems with your control panels, call MCI Electronics on 01324 611371 to…
Date posted:
MCI received a 40 year old Bandmill setting system which was intermittently failing. We took the elderly system apart and, after some fault finding, we replaced the failing components. We then built a test rig to ensure the system was stable. The customer was delighted because not many electrical engineers…
