Date posted:
MCI received an electric car charger from a customer who said that it had stopped working. Once the MCI engineer had looked inside the unit, it became apparent that the internal terminals had slackened and started to overheat and burn. We replaced the connectors to the original standard and the…
Date posted:
MCI sourced, supplied and installed this new DC Drive unit as well as set it up for optimum performance. These units are very common in the motor control industry. If you are looking for motor control solutions, give MCI a call on 01324 611371.
Date posted:
MCI’s engineers were called out to a large water cooled inverter drive, which had a serious fault. The fault had stopped a high production machine from working. The inverter was over £20,000 for a replacement and would have taken several weeks to get a new one. MCI’s engineer partially stripped…
Date posted:
A DC Motor control board that had gone faulty and had tripped out the main supply. The fault was traced back to the Drive unit by one of MCI’s engineers. We sourced a replacement through our distributions department and installed it. As the new unit was factory set, our engineer…
Date posted:
We received a boiler control from a school. The boiler was obsolete and the school didn’t want to buy a whole new machine. We replaced the transformer and tested it, getting the boiler back up and working in no time. There isn’t much we can’t fix at MCI. Give us…
Date posted:
Repair MCI was asked to repair a control panel digitizer that had suffered quite an impact. The digitizer was replaced and the unit checked to make sure it was fully operational. It wasn’t long before the panel was back in service. MCI not only repairs control panels, but also can…
Date posted:
MCI received a circuit board which was damaged because a joiner had put a nail through the power cable of an air conditioning unit. As you can see from the scorch marks, the board was in bad shape by the time it reached us. MCI removed the damaged component, cleaned…
Date posted:
One Saturday afternoon, MCI received an urgent call from a new client. Their HMI display had gone blank and they needed it back up and running the very next day, before their night shift started. MCI went to site and examined it. There was an internal fault in the display.…
Date posted:
MCI had a client with a faulty variable speed drive (VSD) in a high production machine and approached us to see if we could assist. We checked our stock in our warehouse and found that we had a replacement VSD available. However, it was a different type of drive. MCI…
Date posted:
MCI refurbished this 30 year old diesel compressor panel from a large petrochemical manufacturer. We replaced the old rusty enclosure with a new stainless-steel model to make it more resistant to constantly being outside. We then replaced the worn-out parts. See how MCI can refurbish your machinery by calling 01324…
